0086-21-58386189
High-performance centrifugal impact crusher
VSI5X series of high-performance centrifugal impact crusher is my company's introduction of German technology, and a number of proprietary property rights owned new generation of products, set three kinds of fragmentation patterns in one, becoming machine-made sand core equipment industry. A new efficient crusher.
VSI5X series of high-performance centrifugal impact crusher uses: the impact of breaking in a wide range of metal and non-metallic minerals, cement, refractories, abrasives, glass raw materials, construction aggregate, machine-made sand, metallurgical and other industries. Applicable to a variety of different hardness in crushing ore and rock, such as iron ore, nonferrous metal ore, corundum, bauxite, quartz sand, brown corundum, perlite, basalt, high-hardness materials in crushing operations.
VSI5X Series Centrifugal impact crusher features:
1, deep cavity-type rotor optimized designs, so that the amount of material increased by about 30%.
2 weeks after shield partially worn upper and lower U-turn to use, improve material utilization can increase service life of more than 48%.
3, modular hammer design, simply replace the worn hammer parts, can reduce the use of cost over 30%. Add an additional vice hammer, to effectively prevent damage to the primary legislation after the hammer wear plate.
4, the most important core of wear-resistant materials used by the U.S. industry, with a high degree of wear-resistant high-temperature materials.
5, the impact of using diamond block to prevent material damage after impact wear plate legislation.
6, bearing selection in Japan, Sweden, the United States and other international brand.
7, the optimal launch port and internal smoother the curve-shaped design, reducing the flow resistance of materials to significantly enhance the capacity of the material through.
8, dual-purpose bulk plate, simple operation, convenient way to achieve two kinds of feed conversion.
9, the lower spindle special sealing structure to ensure that no oil seals do not leak.
10, using the Japanese original imported hydraulic parts off Cap device, can be convenient and efficient movement of the superstructure, so that the body repair the internal parts to replace labor-saving effort.
11, choose a high level of motor protection. This type of motor has high efficiency, low noise characteristics. Comply with International Electrotechnical Commission (IEC) standard, F class insulation, IP54/55 protection level.
Advantages:
1, the material increases by about 30% by volume
2, increased the life more than 48%
3, reducing the use of the cost of more than 30%
4, advanced and highly wear-resistant high-temperature materials
5, bearing use of advanced technologies in Europe and America
6, the replacement overhaul labor-saving effort
7, motor, high efficiency, low noise
8, no seals do not leak
9, high-grade motor protection
10, Germany advanced technology
VSI5X series centrifugal impact crusher works:
Center feeding: material falling into the into the hopper, through the center feed holes into the high-speed rotation of the rotor to accelerate and is fired after the full mouth throw, first with the rebound after the free-fall part of the materials to impact, and then with the impact on the surrounding vortex The vortex-like material lining cavity (or counter-block), the first to be bounced back to the top of the crushing chamber, after deflection downward movement and rotation Road, emitted from the leaf material impact the formation of a continuous material curtain finally through the lower part of discharge port discharge.
Center feed with ring-waterfall down the feed: material falling into the into the hopper, and then fall through the circular hole has been divided into two shares of bulk plate. Yi Gu through sub-feed tray into the high-speed rotation of the impeller, the other unit from the sub-feed pan around the falls into the impeller material, the impeller being rapidly accelerated after the high-speed throws, first with the bulk material to another part of the disk around the free-fall material impact crusher, and then with the impact on the surrounding swirl of vortex-like material lining cavity (or counter-block), the first to be bounced back to the top of the crushing chamber, after deflection downward movement, and from the leaves alternately Road, emitted material impact to form a continuous material curtain finally discharged via the lower discharge port.
VSI5X series of high-performance centrifugal impact crusher technical parameters:
| Model | VSI5X7615 | VSI5X8522 | VSI5X9532 | VSI5X1145 | ||
| Throughput (t / h) | Waterfall down with the center feed | 150 ~ 280 | 240 ~ 380 | 350 ~ 540 | 500 ~ 640 | |
| Center-wide feed | 70 ~ 140 | 120 ~ 200 | 180 ~ 280 | 250 ~ 360 | ||
| Maximum feeding size (mm) | Soft materials | "35 | "40 | "45 | "50 | |
| Hard materials | "30 | "35 | "40 | "45 | ||
| Speed (r / min) | 1700 ~ 1900 | 1500 ~ 1700 | 1300 ~ 1510 | 1100 ~ 1310 | ||
| Dual-Motor Power kW | 110 ~ 150 | 180 ~ 220 | 260 ~ 320 | 400 ~ 440 | ||
| Dimension L × W × H (mm) | 4100 × 2330 × 2300 | 4140 × 2500 × 2700 | 4560 × 2600 × 2900 | 5100 × 2790 × 3320 | ||
| Weight (t) | 8.6 | 11.8 | 17.5 | 27.5 | ||
| Power | 380v, 50Hz | |||||
| Dilute oil lubrication station | Double pump motor power | 2X0.31kW | ||||
| Security | Complementary pairs of oil-fuel supply; no oil flow automatic shutdown; water cooling; winter electric heating starts | |||||
| Fuel tank heating power | 2kW | |||||
| Dimension L × W × H (mm) | 820X520X1270 | |||||
| Fuel tank capacity (L) | 240 |
| Rated pressure (MPa) | 0.63 |
| Flow rate (L / min) | 8 |
| Power (Kw) | 0.31 |
| Cooling water consumption (m3 / h) | ≥ 1.2 |
| Electric heating voltage (V) | 220 |
| Media | Bearing oil 32-46 # |
NOTE: This specification is just for reference, any changes are subject to the products.
